Skyworks Solutions, Inc.: LCD Driver: AAT3103-4: AAT3103IJQ-4-T1

Power Electronics Products from CDI

PWM Linear Three-Channel Charge-Pump LED Driver
Manufacturer: Skyworks Solutions, Inc.
Status: Standard
Data Sheet: AAT3103IJQ-4-T1 Data Sheet
RoHS Compliance: Skyworks Solutions, Inc., AAT3103IJQ-4-T1, LCD Driver, PWM Linear Three-Channel Charge-Pump LED Driver (Rohs Compliant), Component Distributors Inc. (CDI) Yes
White LED Drivers
Charge Pump
Iout Max per Channel:
30 mA
# of LEDs:
# LED Channels:
Vin Min:
2.7 V
Vin Max:
5.5 V
IQ (typ):
1900 µA
Peak Efficiency (%):
SC70JW 10L, 2.0 x 2.2 x 0.55
Also Available
Part FunctionPart NumberDescription
Evaluation Board AAT3103IJQ-4-DB1 Skyworks Solutions, Inc. Demo board for AAT3103IJQ-4-T1
The AAT3103 is a constant frequency charge-pump based current-source white LED driver capable of driving one to three LEDs up to 30mA, each. The charge pumps automatically switch between 1x mode and 2x mode to maintain the highest efficiency and optimal LED current accuracy and matching. A low external parts count (one 1µF flying capacitor, two small 1µF capacitors at IN and OUT and one current setting resistor) makes the AAT3103 ideally suited for small battery-powered applications. The AAT3103-1/-2 uses AnalogicTech's Simple Serial Control™ (S²Cwire™) interface to enable, disable, and program the LED driving current. The AAT3103-4 employs a Pulse Width Modulation (PWM) signal with up to 50kHz frequency, 10% to 100% duty cycle to program the LED current. A low-current shutdown feature disconnects the load from IN and reduces quiescent current to less than 1µA. Built-in soft-start circuitry prevents excessive inrush current during start-up. Integrated short circuit and thermal protection circuitry protects the device from damage. The AAT3103 is available in a 2x2.1mm thermally enhanced Pb-free 10-lead SC70JW-10 package.
Call 1-800-777-7334 for Availability or Get a Quote
Package Format
DescriptionUnits Per FormatAvailable
(T/R) 3000 0