Power Amplifier Module from Skyworks Solutions, Inc.

PA Module, 1920 - 1980 MHz, CDMA/WCDMA, 28.25 dBm, 3x3 mm

PA Module, 1920 - 1980 MHz, CDMA/WCDMA, 28.25 dBm, 3x3 mm
Manufacturer: Skyworks Solutions, Inc.
Status: Standard
Data Sheet: SKY77761-11 Data Sheet
RoHS Compliance: Skyworks Solutions, Inc., SKY77761-11, RF Power Amplifier Module, PA Module, 1920 - 1980 MHz, CDMA/WCDMA, 28.25 dBm, 3x3 mm (Rohs Compliant), Component Distributors Inc. (CDI) Yes
Skyworks Solutions, Inc.
RoHS Compliance:
Frequency Min:
1.92 GHz
Frequency Max:
1.98 GHz
28.5 dB
V d:
3.4 V
I d:
410 mA
atPout (SCL):
28.25 dBm
Power Added Efficiency:
48 %
3x3 mm
Also Available
Part FunctionPart NumberDescription
Evaluation Board EN20-D957-001 REV A Skyworks Solutions, Inc. Evaluation Board for SKY77761-11 CDMA/WCDMA PA Module 1920-1980 MHz
The SKY77761-11 Power Amplifier Module (PAM) is a fully matched 10-pad surface mount module developed for Wideband Code Division Multiple Access (WCDMA) applications. This small and efficient module packs full 1920–1980 MHz bandwidth coverage into a single compact package. Because of high efficiencies attained throughout the entire power range, the SKY77761-11 delivers unsurpassed talk-time advantages. The SKY77761-11 meets the stringent spectral linearity requirements of High Speed Downlink Packet Access (HSDPA), and High Speed Uplink Packet Access (HSUPA) data transmission with high power added efficiency. An integrated directional coupler eliminates the need for any external coupler. The Gallium Arsenide (GaAs) Microwave Monolithic Integrated Circuit (MMIC) contains all amplifier active circuitry, including input and interstage matching circuits. The silicon CMOS support die, providing precision biasing for the MMIC affords a true CMOS-compatible control interface. Output match into a 50-ohm load, realized off-chip within the module package, optimizes efficiency and power performance. The SKY77761-11 is manufactured with Skyworks’ InGaP GaAs Heterojunction Bipolar Transistor (HBT) process which provides for all positive voltage DC supply operation and maintains high efficiency and good linearity. While primary bias to the SKY77761-11 can be supplied directly from any suitable battery with an output of 3.2 V to 4.2 V, optimal performance is obtained with VCC2 sourced from a DC-DC power supply adjusted within 0.5 V to 3.6 V based on target output power levels. Power down executes by setting VENABLE to zero volts. No external supply side switch is needed as typical “off” leakage is 1 μA with full primary voltage supplied from the battery.
On Order: 100
+1001 Day
Call 1-800-777-7334 for Availability or Get a Quote